Ceasefire: Manufacturers — NPHS-UK: Installers
Get a Quote
Get Your Quote
If you have any questions about fire suppression in the commercial kitchen, do not hesitate to contact us direct.
— commercial water mist
Valves and Accumulators
We will supply and install the full commercial water mist system including all pipework, valves, accumulators, electrical cabinets and fittings suitable for each and every unique job.
— Commercial Mist
Applications
The section valve is used to divide the commercial water mist system into different sections. In the case of fire the sprinkler activates, causing flow through the valve. The flow is detected by the flow switch, which sends a signal to the control board, identifying the activated section.
An accumulator is an energy storage device: a device which accepts energy, stores energy, and releases energy as needed. NPHS-UK Accumulators are designed to accept energy at a low rate over a long interval and deliver the energy at a high rate over the approved water mist activation timeframe.
Electrical + Hydraulic
Section Valves
We can use both electric and hydraulic applications to best match wet/dry pipe property requirements.
Section valves are used to divide our sprinkler system into sections and are normally open and monitored. When there is water flow through the valve, it indicates a sprinkler has been activated and the high-pressure water mist system is automatically activated.
Commercial Water Mist
Accumulators
Nitrogen filling pressure – 200 bar
Nitrogen bottle volume – 50 Litres
Water bottle volume – 68 Litres
Voltage supply* – 24 V DC 13 W
* Accumulator units can be painted to RAL specification.
Custom built
Electrical Cabinets
We have built in an override starter feature.
Each pump can be started manually by turning the key switch from ”MAN/AUT” to “MAN” position and then each pump can be re-started individually.
— Commercial: Water Mist
Quick Link
Scroll through our supporting articles:
